1977 ORDINANCES - Laserfiche WebLink

Home Browse Search

44-90 FOR FULL COMPLIANCE WITH THIS ARTICLE EXCEED THREE YEARS. THE DIRECTOR AND THE AUTHORITY MAY REQUIRE FULL COMPLIANCE WITH THIS ARTICLE BEFORE THE APPLICANT MAY BEGIN TO DISCHARGE OR CONTINUE TO DISCHARGE ANY INDUSTRIAL • WASTE OR POLLUTANTS INTO THE SANITARY SEWER SYSTEM WHENEVER THE AUTHORITY FINDS THAT SUCH DISCHARGE IS LIKELY TO POSE AN IMMEDIATE DANGER TO THE SANITARY SEWER SYSTEM OF THE AUTHORITY OR THE HEALTH, SAFETY AND GENERAL WELFARE OF THE PUBLIC. (D) UPON FINAL APPROVAL OF AN APPLICATION FOR A PERMIT TO DISCHARGE INDUSTRIAL WASTE OR POLLUTANTS INTO THE SANITARY SEWER SYSTEM THE DIRECTOR OF PUBLIC WORKS SHALL ISSUE SUCH PERMIT. SECTION 24-21. MEASUREMENT OF VOLUME OF INDUSTRIAL WASTE. THE VOLUME OF INDUSTRIAL WASTE DISCHARGED BY ANY PERSON INTO THE SANITARY SEWER SYSTEM SHALL BE MEASURED BY ONE OR MORE OF THE FOLLOWING METHODS: • (A) IF THE VOLUME OF WASTE PRODUCED BY ANY PERSON IN HIS INDUSTRIAL OR PROCESS OPERATIONS IS SUBSTANTIALLY THE SAME AS THE VOLUME OF WATER PURCHASED FROM THE CITY, THEN THE VOLUME OF WATER PURCHASED SHALL BE CONSIDERED TO BE THE VOLUME OF WASTE DISCHARGE. (B) IF, IN THE ESTABLISHMENT OF ANY PERSON DISCHARGING INDUSTRIAL WASTE INTO THE SANITARY SEWER SYSTEM, A SUBSTANTIAL PORTION OF THE WATER PURCHASED FROM THE CITY IS USED FOR PURPOSES RESULTING IN NORMAL DOMESTIC %n SEWAGE, FOR COOLING PURPOSES, OR FOR PURPOSES THAT DO NOT REQUIRE THE DISCHARGE OF SUCH USED WATER TO THE SANITARY SEWER SYSTEM, SUCH PERSON SHALL, AT HIS OWN EXPENSE, EITHER (1) INSTALL A METER OF DESIGN APPROVED BY THE DIRECTOR OF PUBLIC WORKS OR HIS DESIGNEE ON THE WATER SUPPLY LINE TO HIS INDUSTRIAL PROCESS OPERATIONS OR (2) INSTALL A METER OF DESIGN APPROVED BY THE DIRECTOR OF PUBLIC WORKS OR HIS DESIGNEE ON THE WASTE LINE FROM SUCH INDUSTRIAL PROCESS OPERATIONS. THE VOLUME OF WATER OR WASTE FLOW, RESPECTIVELY, AS MEASURED THROUGH SUCH METER SHALL BE CONSIDERED TO BE THE VOLUME OF INDUSTRIAL WASTE DISCHARGED INTO THE SANITARY SEWER SYSTEM. (C) IF ANY PERSON NOW DISCHARGING OR PROPOSING TO DISCHARGE INDUSTRIAL WASTE INTO THE SANITARY SEWER SYSTEM DOES NOT SECURE HIS ENTIRE WATER SOURCE FROM THE CITY SUCH PERSON SHALL, AT HIS OWN EXPENSE, INSTALL A METER OF DESIGN APPROVED BY THE DIRECTOR OR HIS DESIGNEE ON THE WASTE • LINE FROM HIS INDUSTRIAL PROCESS OPERATIONS. THE VOLUME OF WASTE FLOW , AS MEASURED THROUGH SUCH METER SHALL BE CONSIDERED TO BE THE VOLUME OF WASTE (A) ANY PERSON NOW DISCHARGING OR PROPOSING TO DISCHARGE ANY INDUSTRIAL WASTE INTO THE SANITARY SEWER SYSTEM SHALL CONSTRUCT, AT HIS OWN EXPENSE, A CONTROL MANHOLE ON THE WASTE LINE FROM HIS INDUSTRIAL AND PROCESS OPERATIONS FOR THE PURPOSE OF FACILITATING OBSERVATIONS, MEASURE- MENTS, AND SAMPLING OF THE INDUSTRIAL WASTE DISCHARGE FROM SUCH PERSON'S ESTABLISHMENT. THE CONTROL MANHOLD SHALL BE CONSTRUCTED IN A SUITABLE AND SATISFACTORY LOCATION DOWNSTREAM FROM ANY PRETREATMENT FACILITIES, HOLDING TANKS, OR OTHER APPROVED WORKS, AND AHEAD OF THE POINT OF DISCHARGE OF SUCH WASTE INTO THE SANITARY SEWER SYSTEM. THE DESIGN OF THE DISCHARGED TO THE SANITARY SEWER SYSTEM. SECTION 24-22. ACCESS FOR MEASUREMENTS. (A) ANY PERSON NOW DISCHARGING OR PROPOSING TO DISCHARGE ANY INDUSTRIAL WASTE INTO THE SANITARY SEWER SYSTEM SHALL CONSTRUCT, AT HIS OWN EXPENSE, A CONTROL MANHOLE ON THE WASTE LINE FROM HIS INDUSTRIAL AND PROCESS OPERATIONS FOR THE PURPOSE OF FACILITATING OBSERVATIONS, MEASURE- MENTS, AND SAMPLING OF THE INDUSTRIAL WASTE DISCHARGE FROM SUCH PERSON'S ESTABLISHMENT. THE CONTROL MANHOLD SHALL BE CONSTRUCTED IN A SUITABLE AND SATISFACTORY LOCATION DOWNSTREAM FROM ANY PRETREATMENT FACILITIES, HOLDING TANKS, OR OTHER APPROVED WORKS, AND AHEAD OF THE POINT OF DISCHARGE OF SUCH WASTE INTO THE SANITARY SEWER SYSTEM. THE DESIGN OF THE